Home Up Laseraim Levels Laseraim Laser Modules Laseraim Accessories
| |

LTT11 - LASERAIM
1" STRAIGHTSIDE™ LINEAR ADJUSTABLE FOCUS ALIGNMENT TOOL, BATTERY POWERED
Key Benefits
 | Battery Powered, over 50 hours of continuous battery life (LTA4-battery, not included) |
 | Linear Adjustable Focus (dot size adjustment) – Focus may be adjusted without
losing laser calibration (Patented) |
 | Smallest dot sizes possible at all distances |
 | Elliptical to Round dot shape (depending on focus setting and projection
distance) with sharp image edges at all distances, provides accurate center
of dot measurements for increased accuracy at all distances |
 | Works with all accessory optics - See: Accessory
Optics Section |
 | Four-way X & Y lockable laser position adjustments, allow the
laser to be calibrated parallel with the housings' centerline or adjusted to a
specific point of impact after mounting. Adjustments are lockable to
maintain settings under vibration. |
 | High-quality three-piece glass optics, provide very sharp-edged laser
image. |
 | Precision Machined 1" outside diameter. (0.990") |
 | Constant on/off toggle switch. |
 | "H" version HOTDOT® - 1000 Ft. Range or "U" version ULTRAHOT™ - 2000 Ft. Range. |
Specifications
LTT11
Specifications |
Power |
Battery
Powered, over 50 hours of continuous battery life (LTA4-battery, not included).
3 Volt Lithium.
|
Laser
/ Max. Range |
"H"
version HOTDOT® - 1000 Ft. Range, Class IIIa, 650nM, <5mW max,
3.5mW typical
"U" version ULTRAHOT™ - 2000 Ft.
Range, Class IIIa, 635nM, <5mW max, 4.75mW typical
* All models available as Class II,
<1mW max. upon request
|
Focus |
Linear
Adjustable Focus, Focus may be adjusted without
losing laser calibration (Patented)
|
Smallest
Obtainable Dot Sizes @ Distances |
1/32"
x 1/32" from 0 to 6 feet
1/16"
x 1/16" @ 10 feet
3/32" x
1/8" @ 25 feet
1/8" x
1/4" @ 50 feet
3/16" x
3/8" @ 100 feet
5/16" x
7/16" @ 150 feet
5/8" x
7/8" @ 300 feet
Dot Size
continues to increase proportionately at longer distances. |
X
& Y Adjustments |
Locking 4
Way Adjustments
Four screws on the head of the laser, positioned at 12, 3, 6 and
9 o'clock, allow the laser image to be adjusted up, down, left and
right after the laser is permanently mounted. Locking screws
in between the adjustment screws allow the X & Y settings to be
locked in place, keeping the adjustments from moving under
vibration. |
Accessories |
LTA1
- Variable-Length Line Projecting Lens
LTA2
- 90 Degree Beamsplitting Lens
LTA3
- Daylight Use Reflective Target
LTA5
- Adjustable Brightness Filter
LTA6-1
- Crosshair Projecting Lens
LTA8
- Dotted Line Lens
LTA11
- Magnetic Scale
LTA12
- Fixed-Length Line Lens, 6" line per 12" distance
LTA13
- Fixed-Length Line Lens, 8" line per 12" distance
LTA14
- Fixed-Length Line Lens, 16" line per 12" distance
LTA15
- Fixed-Length Line Lens, 28" line per 12" distance
LTA20
- Remote Battery Pack
LTAT1
- Mounting Bracket
LTAT2
- Magnetic Pivoting Mounting Base |
Size
|
5-3/4"
L x 1-1/2" W x 1" H, (5.607"+0.143"
L (depending on focus setting) x 1.5" W x 1.0" H) |
Pricing
Description |
Part # |
Price |
STRAIGHTSIDE LINEAR ADJUSTABLE
FOCUS ALIGNMENT TOOL, BATTERY POWERED, HOTDOT |
LTT11H |
$ 529 |
STRAIGHTSHOT LINEAR
ADJUSTABLE FOCUS ALIGNMENT
TOOL, BATTERY POWERED, ULTRAHOT |
LTT11U |
$ 679 |
|