Home
Up
Laseraim Levels
Laseraim Laser Modules
Laseraim Accessories

 

LTT4 - LASERAIM 1" STRAIGHTSHOT™ LINEAR ADJUSTABLE FOCUS ALIGNMENT TOOL, BATTERY POWERED

Key Benefits

Battery Powered, over 50 hours of continuous battery life (LTA4-battery, not included)
Linear Adjustable Focus (dot size adjustment) – Focus may be adjusted without losing laser calibration (Patented)
Smallest dot sizes possible at all distances
Elliptical to Round dot shape (depending on focus setting and projection distance) with sharp image edges at all distances, provides accurate center of dot measurements for increased accuracy at all distances
Works with all accessory optics - See: Accessory Optics Section
Four-way X & Y lockable laser position adjustments, allow the laser to be calibrated parallel with the housings' centerline or adjusted to a specific point of impact after mounting.  Adjustments are lockable to maintain settings under vibration.
High-quality three-piece glass optics, provide very sharp-edged laser image.
Precision Machined 1" outside diameter. (0.990")
Constant on/off toggle switch. 
"H" version HOTDOT® - 1000 Ft. Range or "U" version ULTRAHOT™ - 2000 Ft. Range.

Specifications

LTT4
Power Battery Powered, over 50 hours of continuous battery life (LTA4-battery, not included). 3 Volt Lithium.
Laser / Max. Range "H" version HOTDOT® - 1000 Ft. Range, Class IIIa, 650nM, <5mW max, 3.5mW typical

"U" version ULTRAHOT™ - 2000 Ft. Range, Class IIIa, 635nM, <5mW max, 4.75mW typical

* All models available as Class II, <1mW max. upon request

Focus Linear Adjustable Focus, Focus may be adjusted without losing laser calibration (Patented)
Smallest Obtainable Dot Sizes @ Distances

1/32" x 1/32" from 0 to 6 feet

1/16" x 1/16" @ 10 feet

3/32" x 1/8" @ 25 feet

1/8" x 1/4" @ 50 feet

3/16" x 3/8" @ 100 feet

5/16" x 7/16" @ 150 feet

5/8" x 7/8" @ 300 feet

Dot Size continues to increase proportionately at longer distances.

X & Y Adjustments Locking 4 Way Adjustments

Four screws on the head of the laser, positioned at 12, 3, 6 and 9 o'clock, allow the laser image to be adjusted up, down, left and right after the laser is permanently mounted.  Locking screws in between the adjustment screws allow the X & Y settings to be locked in place, keeping the adjustments from moving under vibration.

Accessories LTA1 - Variable-Length Line Projecting Lens

LTA2 - 90 Degree Beamsplitting Lens

LTA3 - Daylight Use Reflective Target

LTA5 - Adjustable Brightness Filter

LTA6-1 - Crosshair Projecting Lens

LTA8 - Dotted Line Lens

LTA11 - Magnetic Scale

LTA12 - Fixed-Length Line Lens, 6" line per 12" distance

LTA13 - Fixed-Length Line Lens, 8" line per 12" distance

LTA14 - Fixed-Length Line Lens, 16" line per 12" distance

LTA15 - Fixed-Length Line Lens, 28" line per 12" distance

LTA20 - Remote Battery Pack

LTAT1 - Mounting Bracket

LTAT2 - Magnetic Pivoting Mounting Base

Size 1" D  x  6-1/2" L,  (0.990" x 6.558" + 0.143" depending on focus setting)

Pricing

Description Part # Price
1" STRAIGHTSHOT LINEAR ADJ. FOCUS ALIGNMENT TOOL, 110V, HOTDOT LTT $ 529
1" STRAIGHTSHOT LINEAR ADJ. FOCUS ALIGNMENT TOOL, 110V, ULTRAHOT LTT4U $ 679
1" STRAIGHTSHOT LINEAR ADJ. FOCUS ALIGNMENT TOOL, 110V, GREEN LTT4G $ 829
 
Send mail to lasers@laseraimtools.com for ordering information, questions or comments about this web site.
Specifications subject to change without notice.
Copyright © 2005-2017 Laseraim Tools Inc., All rights reserved.