Home
Up
Laseraim Levels
Laseraim Laser Modules
Laseraim Accessories

 

LTT5 - LASERAIM DRILL / CHUCK ADJUSTABLE FOCUS ALIGNMENT TOOL, BATTERY POWERED

Key Benefits

¼" diameter (0.245") x 1-1/4" long rear stud allows laser to be chucked or fixtured into a 1/4" hole for setup and alignment of drills, lathes, bar feeders, motor bearings or other unique alignment applications. 
Rotary On/Off switch built in. 
High quality single lens glass optics.
Adjustable Focus Optics provide smaller laser dot sizes at distances less than 25 feet.
Three thumbscrews provide laser X&Y position adjustments, allow the laser to be calibrated parallel with the centerline or adjusted to a specific point of impact after mounting.
Runs on 4 watch batteries, part number LTA7.  Batteries provide up to 6 hours continuous use.
Accepts All Accessory Optics 
"H" version HOTDOT® - 500 Ft. Range or "U" version ULTRAHOT™ - 1000 Ft. Range.

Specifications

LTT5
Power (4) #386 Watch Batteries, Part # LTA7.

Provides up to 6 hours of continuous battery life.

Laser / Max. Range "H" version HOTDOT® - 500 Ft. Range, Class IIIa, 650nM, <5mW max, 3.5mW typical

"U" version ULTRAHOT™ - 1000 Ft. Range, Class IIIa, 635nM, <5mW max, 4.75mW typical

* All models available as Class II, <1mW max. upon request

Focus User Adjustable Focus provides the smaller dot sizes  at distances of 25 ft. or less.

Changing the focus setting affects the laser dot's X&Y position.

Smallest Obtainable Dot Sizes @ Distances

1/64" x 1/32" @ <2"

1/32" x 1/16" @ 2"-2'

1/16" x 1/8" @ 5'

3/32" x 3/16" @ 10'

1/8" x 1/4" @ 15'

3/16" x 7/16" @ 25'

5/16" x 3/4" @ 50'

1/2" x 1-1/4" @ 100'

11/16" x 1-3/4" @ 150'

Dot Size continues to increase proportionately at longer distances.

Dot Rounding Optics available for distances of 50 ft. or less.  Click Here for Details

X & Y Adjustments 3 Way X & Y Adjustments

Three screws on the head of the laser allow the laser image to be adjusted up, down, left and right after the laser is mounted.

Accessories LTA7 - 4 Pack Batteries

LTA3 - Daylight Use Reflective Target

LTA11 - Magnetic Scale

Accessory Optics

Size 1-1/4" (1.220") D (includes thumbscrew dia.)  x  4" L (4.075" + 0.125" (depending on focus setting)

Pricing

Description Part # Price
DRILL / CHUCK ALIGNMENT TOOL, ADJ. FOCUS, BAT. PWD., HOTDOT LTT5H $ 169
DRILL / CHUCK ALIGNMENT TOOL, ADJ. FOCUS, BAT. PWD., ULTRAHOT LTT5U $ 319

 

Send mail to lasers@laseraimtools.com for ordering information, questions or comments about this web site.
Specifications subject to change without notice.
Copyright © 2005-2017 Laseraim Tools Inc., All rights reserved.